Lithium Hexafluorophosphate
项目 Items |
单位 Units |
指标 Specification |
六氟磷酸锂Lithium hexafluorophosphate | ω/% | ≥99.95 |
碳酸二甲酯(DMC)不溶物Dimethyl carbonate | ω/% | ≤0.0200 |
水分Moisture | ω/% | ≤0.0020 |
游离酸(以HF计)Free acid | ω/% | ≤0.0090 |
硫酸盐(以SO4计)Sulfate | mg/kg | ≤5 |
氯化物(以Cl计)Chlorid | mg/kg | ≤2 |
Fe | mg/kg | ≤2 |
K | mg/kg | ≤1 |
Na | mg/kg | ≤2 |
Ca | mg/kg | ≤2 |
Cd | mg/kg | ≤1 |
Cr | mg/kg | ≤1 |
Cu | mg/kg | ≤1 |
Mg | mg/kg | ≤1 |
Ni | mg/kg | ≤1 |
Pb | mg/kg | ≤1 |
Zn | mg/kg | ≤1 |
As | mg/kg | ≤1 |
六氟磷酸锂在密闭、干燥条件下进行包装。净含量不大于10Kg的产品采用耐腐瓶包装,外用铝塑膜袋抽真空包装。净含量不小于25kg的产品采用不锈钢桶包装,不锈钢桶应耐压能力大于0.6MPa,内充惰性气体(气压不小于30kPa),加盖防护盖。
Lithium hexafluorophosphate is packed under closed and dry conditions. Products with a net content of less than 10Kg are packed in corrosion-resistant bottles, then vacuum packaging with Al-laminated film. Products with a net content of at least 25kg are packed in stainless steel barrels, the stainless steel barrel should have a pressure-resistant capacity of more than 0.6mpa, be filled with inert gas (air pressure not less than 30kPa), and be covered with a protective cover.